²úÆ·Ðͺţº(Avago:ABCU-5730RZ£¨Ìæ»»ÐͺÅ:FTCS-GE-TAxxx£©)
²úÆ·ÃèÊö£º10/100/1000BASE-T SFP RJ45 Transceiver module
¼æÈÝÆ·ÅÆ£ºAvago
Ô­³§ÃèÊö£º10/100/1000BASE-T SFP RJ45 Transceiver module

Description

The ABCU-57xxxxZ family of electrical transceivers from Avago Technologies offer full-duplex throughput of 1000 Mbps by transporting data over shielded and unshielded twisted pair category 5 cable with 5-level PAM (Pulse Amplitude Modulation) signals.The Avago Technologies 1000BASE-T module takes signals from both the twisted pair category 5 cable and the SerDes interface. Pin count overhead between the MAC and the PHY is minimized, and Gigabit Ethernet operation is achieved with maximum space savings.

Product Ordering Information

• ABCU-5730RZ -5~70 RX_LOS enabled
• ABCU-5740RZ -5~70 RX_LOS disabled
• ABCU-5730GZ -5~70 RX_LOS enabled & Isolated ground
• ABCU-5730ARZ -40~85 RX_LOS enabled
• ABCU-5740ARZ -40~85 RX_LOS disabled
• ABCU- 5740AGZ -40~85 RX_LOS disabled & Isolated ground
• ABCU-5731ARZ -40~85 SGMII RX_LOS enabled
• ABCU-5741ARZ -40~85 SGMII RX_LOS disabled
• ABCU-5741AGZ -40~85 SGMII RX_LOS disabled &Isolated ground
• ABCU-5731RZ -5~70 SGMII RX_LOS enabled
• ABCU-5741RZ -5~70 SGMII RX_LOS disabled Related Products
• AFBR-5710Z Family of 850nm +3.3V SFP optical transceivers for Gigabit Ethernet
• AFCT-5710Z Family of 1310nm +3.3V SFP optical transceivers for Gigabit Ethernet

Features

• RoHS-6 Compliant (see Table 1)
• Designed for Industry-Standard, Small Form FactorPluggable (SFP) Ports
• Compliance with IEEE 802.3:2005
• Custom RJ-45 connector with integrated magnetics
• Link lengths at 1.25 Gbd: up to 100 m per IEEE802.3
• Low power, high performance 1.25 Gbd SerDes integratedin module
• Single +3.3 V power supply operation
• Auto-negotiation per IEEE 802.3:2005 Clause 28(Twisted Pair) and Clause 37 (1000BASE-X)
• Compatible to both shielded and unshielded twisted pair category 5 cable
• Available in Commercial Temperature (-5~70 ¡ãC) and Industrial Temperature (-40~85 ¡ãC)
• 10/100/1000BASE-T operation available with SGMII host systems.

Applications
? Switch to switch interface
? Switched backplane applications
? File server interface

Module Diagrams
Figure 1 illustrates the major functional components of the ABCU-57xxxxZ family of transceivers. The 20-pin connection diagram of module printed circuit board of the module is shown in Figure 2. Figure 3 depicts the pin assignment of the MDI (RJ45 jack).